Vaddio’s IN-Ceiling Half-Recessed Enclosure is anattractive, easy to install, partially recessed and inverted,pan/tilt/zoom camera mounting system for Vaddio HD PTZcameras. It is compatible with the Vaddio ClearVIEW,PowerVIEW and RoboSHOT packages using the QuickConnect SR Quick-Connect DVI/HDMI-SR, Quick-ConnectUSB and Quick-Connect USB Mini.
The enclosure features a sealed, recessed, metal ceilingcamera enclosure with one-piece tile support brace, whitetrim ring and mounting hardware kit. The white trim ring hasan IR receiver and there is an IR emitter board, powered bythe Quick-Connect Interfaces, on the inside of the enclosureto ensure full compatibility with the Vaddio IR Remote.
The IN-Ceiling enclosure is compatible with the followingcamera systems using RS-232 only; ClearVIEW HD20SE/20/19/18, PowerVIEW HD-22/30, when locallypowered, and Quick-Connect Universal CCU Systems forPowerVIEW, ClearVIEW and RoboSHOT, which arepowered and controlled by the CCU. These systems do notuse the IR Receiver/Emitter circuit inside the enclosure.
These ultra-flexible camera enclosures are compatible withall Vaddio HD PTZ camera systems. The IN-Ceiling HalfRecessed Enclosure is an appealing and concealing cameramounting option.
Active IR Circuit Built into the Trim Ring & Enclosure: The IN-Ceiling Enclosure has a built-in active IR receiver on the trimring and IR emitter on the inside of the back box. The IR circuit is powered by the Quick-Connect SR, Quick-Connect DVI/HDMISR, Quick-Connect USB and Quick-Connect USB Mini Interfaces and ensures IR remote control compatibility of the camerawhen not controlling the camera through serial (RS-232) commands.
Sealed Metal Back Box: The shallow, sealed metal back box features a steel machined bezel ring and back box lid which givesthe enclosure a quality look and feel. The enclosure even includes a ¾” clamp-down conduit connector.
Recessed Installation Kit for IN-Ceiling Enclosure: The IN-Ceiling Half-Recessed Enclosure can be mounted into a gypsumboard (drywall) or hard wood ceiling with the Recessed Installation Kit, Part Number 998-2225-051. This Kit includes mountingplates, large trim ring with active IR receiver and all required mounting hardware.
WHAT’S INCLUDED
The IN-Ceiling Half-Recessed Enclosure Includes:
- Shallow, Sealed Metal Back Can with Bezel Ring, Back BoxLid and Internal IR Emitter Board.
- White Trim Ring with IR Receiver with Cable Attached.
- One-piece Tile Support Brace.
- 3/4” Platform Height Adapter for HD-20/22/30 Camera.
- Mounting Hardware 24” (0.61m) Cat-5e Patch Cable.
